Can anyone understand those instructions?

Die Mutter dieses Forums.
Antworten
ronenfe
Profi
Profi
Beiträge: 74
Registriert: 26. Sep 2017, 00:30
Wohnort: Israel

Can anyone understand those instructions?

Beitrag von ronenfe »

Benutzeravatar
takoda
Spezialist
Spezialist
Beiträge: 714
Registriert: 19. Mai 2016, 18:33
Wohnort: Wuppertal
Kontaktdaten:

Re: Can anyone understand those instructions?

Beitrag von takoda »

I'm assuming you're talking about the instructions in the picture? I think they're fairly easy to understand... the hose is longer than needed for installation on the XF (probably since it also fits other models), and you're supposed to cut it to the length you need, making sure you install it in a way where it isn't unnecessarily bent or twisted, so that whatever needs to flow through this hose can do so without being obstructed.
...still out here in the wind and rain ~ I look a little older but I feel no pain...
1998 XF650 ~ 2004 GS500F ~ 1994 GS500E ... 4 life!!!
.::Snailie, die Schrauberschnecke::.
ronenfe
Profi
Profi
Beiträge: 74
Registriert: 26. Sep 2017, 00:30
Wohnort: Israel

Re: Can anyone understand those instructions?

Beitrag von ronenfe »

This I understand, but I don't understand what the model converstion mean between old and new and how long should I cut in the table below.
blaze
Spezialist
Spezialist
Beiträge: 213
Registriert: 26. Aug 2015, 20:18

Re: Can anyone understand those instructions?

Beitrag von blaze »

Its a rubber tube - just cut it, plug it in and check whether it is not bend or squeezed somewhere.
ronenfe
Profi
Profi
Beiträge: 74
Registriert: 26. Sep 2017, 00:30
Wohnort: Israel

Re: Can anyone understand those instructions?

Beitrag von ronenfe »

I ended up cutting it to 170 mm. However I still don't understand what they mean.
Benutzeravatar
AoS
Site Admin
Site Admin
Beiträge: 1916
Registriert: 27. Jun 2006, 20:58
Wohnort: Köln

Re: Can anyone understand those instructions?

Beitrag von AoS »

The instructions are simple: Find the original spare part number (A-F), and cut to appropriate length. So if C is your original part number, you cut the hose to a length of 320mm.
Schönste Freewind der Welt:
http://www.lucasmatic.de
ronenfe
Profi
Profi
Beiträge: 74
Registriert: 26. Sep 2017, 00:30
Wohnort: Israel

Re: Can anyone understand those instructions?

Beitrag von ronenfe »

The problem is that the part diagram already
shows the new number and not the old one
and you can't know what is the old one.
Dateianhänge
2018-06-12_17-19-45.png
Benutzeravatar
AoS
Site Admin
Site Admin
Beiträge: 1916
Registriert: 27. Jun 2006, 20:58
Wohnort: Köln

Re: Can anyone understand those instructions?

Beitrag von AoS »

https://www.cmsnl.com/suzuki-xf650u-199 ... IG10A.html

HOSE(7X12.1X600)
  • product number: 0935270121600
  • supersession: 093527012100B
  • notes: L:600->125
If that information is correct you have to cut it to 125mm.
Schönste Freewind der Welt:
http://www.lucasmatic.de
ronenfe
Profi
Profi
Beiträge: 74
Registriert: 26. Sep 2017, 00:30
Wohnort: Israel

Re: Can anyone understand those instructions?

Beitrag von ronenfe »

Great finding, thanks.
Antworten